Buick 2002 Rendezvous Owner's Manual download pdf (Page 137)

100

101

2-45

Headlamp High/Low-Beam Changer

To change the headlamps from low to high, simply push

the turn signal lever back. Then release it. To change the

headlamps from high to low, pull the lever forward.

When the high beams are

on, this light, on the

instrument panel cluster and

the optional HUD display,

will also be on.

Flash-to-Pass

When the headlamps are off, pull the lever toward you

to momentarily switch on the high beams (to signal that

you are going to pass). When you release the lever, they

will turn off.

Windshield Wipers

You control the windshield wipers by turning the band

marked WIPER.

For a single wiping cycle, turn the band to MIST. Hold

it there until the wipers start, then let go. The wipers will

stop after one cycle. If you want more cycles, hold the

band on mist longer.

For delayed wiping cycles, you can set the wiper speed

for a long or short delay between wipes. This can be

very useful in light rain or snow. Turn the band to

choose the delay time. The closer to LO (low), the

shorter the delay time.

For steady wiping cycles, at low speed, turn the band

away from you to the LO position. For high-speed

wiping, turn the band further to HI (high). To stop the

wipers, turn the band to OFF.

Remember that damaged wiper blades may prevent you

from seeing well enough to drive safely. To avoid

damage, be sure to clear ice and snow from the wiper

blades before using them. If they’re frozen to the

windshield, carefully loosen or thaw them. If your blades

do become damaged, get new blades or blade inserts.

Heavy snow or ice can overload your wipers. A circuit

breaker will stop them until the motor cools. Clear away

snow or ice to prevent an overload.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 454 455

Comments to this Manuals

No comments

Buick 2002 Rendezvous Owner's Manual Page 137

Comments to this Manuals

Related products and manuals for Cars Buick 2002 Rendezvous