Buick 1994 Skylark Owner's Manual Page 140

  • Download
  • Add to my manuals
  • Print
  • Page
    / 308
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 139
7.
Rotate the TUNE knob right or le€t to make the next
8.
Press the BAND AM-FM Knob and
“000”
will
two numbers agree with your code.
appear. Now you are ready to enter the second three
digits of your code.
9.
Repeat steps
6
and
7
to enter digits.
10.
Press the
AM-FM
knob and “REP’ will appear for
5
seconds and then
“000”
will appear.
:11.
Repeat steps
6
through
10.
This time “SEC” should
appear indicating that the radio is secure.
If
the
display shows
“-
-
-”,
the verification steps were not
,’
successful and the entire sequence must be started
again.
To
Unlock The System After a Power
Loss
‘When battery power is reapplied to a secured radio, the
radio won’t turn on and “LOC” will appear in the
display.
Enter your secret code as follows; pause no more than
I5
seconds between steps.
1.
Turn the ignition
ON.
(Radio
off.)
2.
Press the SET button. The display will show
“000”.
3.
Enter the six digits of the code following steps
6
thru
9
as previously indicated. The display will show the
number as entered.
4.
Press the
AM/FM
button and the time appears
-
indicating that the disabling sequence was
successful. If the display indicates “SEC”, the
number
did
not
match and the unit is still secured.
Disabling The Theft System
1.
2.
3.
4.
5.
6.
Press preset buttons
1
and
4
for
5
seconds with the
ignition ON and radio power OFF. The display will
show “SEC”, indicating the unit is in the secure
mode.
Press the SET button. The display will show
“000”.
Enter the first three digits of the code following steps
6
and
7
of the preceding directions. The display will
show the numbers as entered.
Press the AM-FM button. The radio will display
“000”.
Enter the second three digits of the code. The display
will show the numbers as entered.
Press the
AM-FM
button. If the display shows
numbers matched the user-selected code or the
6‘-
-
-
”,
the disabling sequence was successful. (The
Page view 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 307 308

Comments to this Manuals

No comments