Buick Lucerne 2007 Specifications download pdf (Page 146)

4. Immediately release the button when the

garage door moves. The indicator light will

blink rapidly until programming is complete.

5. Press and release the button again. The

garage door should move, conﬁrming that

programming is successful and complete.

To program another device such as an additional

garage door opener, a security device, or home

lighting, repeat Steps 1 through 6, choosing a

different function button in Step 4 than what you

used for the garage door opener.

Using Universal Home Remote

Press and hold the appropriate button for at least

half of a second. The indicator light will come

on while the signal is being transmitted.

Reprogramming Universal Home

Remote Buttons

You can reprogram any of the three buttons by

repeating the instructions.

Erasing Universal Home Remote

Buttons

You should erase the programmed buttons when

you sell the vehicle or terminate your lease.

To erase either rolling code or ﬁxed code on the

Universal Home Remote device, do the following:

1. Press and hold the two outside buttons at

the same time for about 20 seconds, until

the indicator lights, located directly above

the buttons, begin to blink rapidly.

2. Once the indicator lights begin to blink,

release both buttons. The codes from all

button will be erased.

For additional information on Universal Home

Remote, see Customer Assistance Offices

on page 464.

146

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 495 496

Comments to this Manuals

No comments