Buick 2010 Lacrosse User Manual Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 418
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
4-28 Instruments and Controls
Unit
Move
w x to switch between
Metric or US when the Unit display
is active. Press SET to confirm
the setting. This will change the
displays on the cluster and DIC to
either metric or English (US)
measurements.
Tire Pressure
The display will show a vehicle with
the approximate pressures of all
four tires. Tire pressure is displayed
in either kilopascal (kPa) or pounds
per square inch (psi). See Tire
Pressure Monitor System
on
page 957
and Tire Pressure
Monitor Operation
on page 959
for more information.
Remaining Oil Life
This display shows an estimate
of the oil's remaining useful life.
If Remaining Oil Life 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See Engine Oil Messages
on
page 435
. The oil should changed
as soon as possible. See Engine Oil
on page 911
. In addition to the
engine oil life system monitoring the
oil life, additional maintenance is
recommended in the Maintenance
Schedule in this manual. See
Scheduled Maintenance
on
page 102
for more information.
Remember, the Oil Life display must
be reset after each oil change. It will
not reset itself. Also, be careful
not to reset the Oil Life display
accidentally at any time other than
when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system press SET
while the Oil Life display is active.
See Engine Oil Life System
on
page 913
.
Compass
The vehicle may have a compass
display in the Driver Information
Center (DIC). See Compass
on
page 48
for more information.
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 417 418

Comments to this Manuals

No comments