Buick 2010 Lacrosse User Manual download pdf (Page 133)

Instruments and Controls 4-47

To program up to three devices:

1. Hold the end of your hand-held

transmitter about 3 to 8 cm

(1 to 3 inches) away from the

Universal Home Remote buttons

while keeping the indicator

light in view. The hand-held

transmitter was supplied by the

manufacturer of your garage

door opener receiver

(motor-head unit).

2. At the same time, press and

hold both the hand-held

transmitter button and one of the

three Universal Home Remote

buttons to be used to operate

the garage door. Do not release

the Universal Home Remote

button or the hand-held

transmitter button until the

indicator light changes from a

slow to a rapidly flashing light.

You now may release both

buttons.

Some entry gates and garage

door openers may require

substitution of Step 2 with the

procedure noted in “Gate

Operator and Canadian

Programming” later in this

section.

3. Press and hold for five seconds

the newly-trained Universal

Home Remote button (selected

button from Step 2) while

observing the indicator light

and garage door activation.

.

If the indicator light stays

on continuously or the

garage door starts to move

when the Universal Home

Remote button is pressed

and released, then the

programming is complete.

There is no need to

continue programming

Steps 4 through 6.

.

If the Universal Home

Remote indicator light

blinks rapidly for

two seconds, then turns to

a constant light and the

garage door does not

move, continue with the

programming Steps 4

through 6.

It may be helpful to have

another person to assist

with the remaining Steps 4

through 6.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 417 418

Comments to this Manuals

No comments