Buick 2012 LaCrosse User Manual download pdf (Page 64)

Black plate (8,1)

Buick LaCrosse Owner Manual - 2012

3-8 Seats and Restraints

The vehicle will also automatically

save driver seat and outside mirror

positions to the current driver

Remote Keyless Entry (RKE)

transmitter when the ignition is

placed in OFF. These automatically

stored positions are referred to as

RKE Memory positions. See

Remote Keyless Entry (RKE)

System Operation on page 2‑3 for

more information.

Storing Button Memory Positions

To save positions into Button

Memory:

1. Adjust the driver seat, seatback

recliner, and both outside mirrors

to the desired driving positions.

2. Press and hold MEM (Memory)

and “1” at the same time until a

beep sounds.

3. Repeat Steps 1 and 2 for a

second driver using “2.”

Recalling Button Memory

Positions

To recall the manually saved Button

Memory positions, press and hold

“1” or “2.” The driver seat and

outside mirrors move to the

positions stored to those buttons

when pressed. Releasing “1” or “2”

before the stored positions are

reached stops the recall.

If something has blocked the driver

seat while recalling a memory

position, the recall may stop.

Remove the obstruction; then press

and hold the appropriate manual

control for the memory item that is

not recalling for two seconds. Try

recalling the memory position again

by pressing the appropriate memory

button. If the memory position is still

not recalling, see your dealer for

service.

Recalling RKE Memory Positions

(Memory Remote Recall)

The Memory Remote Recall feature

can recall the driver seat and

outside mirrors to previously stored

RKE Memory positions when

entering the vehicle.

Every time the ignition is placed in

OFF, the positions of the driver seat

and outside mirrors are

automatically stored to the RKE

transmitter that was used to start

the vehicle. These positions are

called RKE Memory positions and

may be different than the previously

mentioned Button Memory positions

saved to the “1” or “2” buttons. To

automatically recall RKE Memory

positions, unlock the driver door

with the RKE transmitter, and open

the driver door. On vehicles with

Keyless Access, opening the driver

door when an RKE transmitter is

present will activate the RKE

Memory recall. If the driver door is

already open, pressing the RKE

transmitter K button will also

activate the RKE Memory recall.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 495 496

Comments to this Manuals

No comments