Buick 2007 Rendezvous User Manual Page 244

  • Download
  • Add to my manuals
  • Print
  • Page
    / 528
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 243
Auto Door Lock/Unlock
The doors will automatically lock when the vehicle
is shifted out of PARK (P). For automatic
unlocking, you can program your vehicle to one of
the following modes:
OFF: When the shift lever is put in PARK (P), the
doors will not unlock automatically.
DRIVER: When the shift lever is put in PARK (P),
only the driver’s door will unlock.
ALL: When the shift lever is put in PARK (P), all
doors will unlock.
Your vehicle was originally programmed to ALL.
The mode may have been changed since then.
To determine the current mode, or to change
the mode, do the following:
1. Follow the instructions for “Entering
Programming Mode” listed previously.
2. Make sure that the AUTO DOOR LOCK
feature is programmed to ON.
3. Press the MODE button until AUTO DOOR
UNLOCK appears on the DIC.
4. Press the SET button until the arrow is before
OFF, DRIVER or ALL.
If the auto door unlock feature has been
programmed to DRIVER or ALL, the automatic
door unlock feature can also be programmed
to one of the following modes:
PARK: Unlock when the shift lever is put in
PARK (P).
KEY OUT: Unlock when the ignition key is
removed.
Your vehicle was originally programmed to PARK.
The mode may have been changed since then.
To determine the current mode, or to change
the mode, do the following:
1. Follow the instructions for “Entering
Programming Mode” listed previously.
2. Follow the instructions for programming AUTO
DOOR UNLOCK to DRIVER or ALL listed
previously.
3. Press the MODE button until AUTO DOOR
UNLOCK/PARK KEYOUT appears on the DIC.
4. Press the SET button until the arrow is before
PARK or KEY OUT.
The mode you selected is now set. You can either
exit programming mode by following the
instructions later in this section or program the next
feature available on your vehicle.
244
Page view 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 527 528

Comments to this Manuals

No comments