Buick 2007 Rendezvous User Manual download pdf (Page 247)

Your vehicle was originally programmed to

LIGHTS. The mode may have been changed

since then. To determine the current mode, or to

change the mode, do the following:

1. Follow the instructions for “Entering

Programming Mode” listed previously.

2. Follow the instructions for programming

HEADLMP EXIT DELAY earlier in this section,

to make sure which mode it is programmed to.

3. Press the MODE button until UNLOCK

FEEDBACK appears on the DIC.

4. Press the SET button until the arrow is before

LIGHTS or OFF.

5. Press the MODE button until you have

determined which mode you prefer, to

follow with the personalization.

The mode you selected is now set. You can either

exit programming mode by following the

instructions later in this section or program the

next feature available on your vehicle.

Lock Feedback

The lock feedback feature can be programmed to

one of the following modes:

OFF: When LOCK is pressed on the Remote

Keyless Entry (RKE) transmitter, the headlamps

and parking lamps will not ﬂash and the horn

will not sound.

LIGHTS: When LOCK is pressed on the RKE

transmitter, the headlamps and parking lamps will

ﬂash brieﬂy.

LIGHTS and HORN: When LOCK is pressed a

second time on the RKE transmitter within

ﬁve seconds, the headlamps and parking lamps

will ﬂash brieﬂy and the horn will sound.

247

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 527 528

Comments to this Manuals

No comments