Buick 2007 Rendezvous User Manual download pdf (Page 402)

100

101

4. Turn the bulb socket one-quarter of a turn

counterclockwise.

5. Pull the bulb assembly out from the lamp

housing.

6. Unhook the electrical connector by lifting up

the tabs and separate the connector from the

bulb base.

7. Install the new bulb into the electrical

connector. Push the bulb ﬁrmly enough so

that the tabs hook over the tab on the bulb.

8. Reverse the steps to reinstall.

9. Reinstall the lamp to its pocket by lining up

the mounting pin and pushing forward to set

the position.

10. Reinstall the screws removed in Step 2.

11. Close the liftgate.

Taillamps and Back-Up Lamps

This procedure is for the liftgate-mounted taillamps

and back-up lamps. To replace one of these bulbs,

do the following:

1. Open the liftgate. See Liftgate on page 118

for more information.

2. Remove the panel inside the liftgate by lifting

the tabs and pulling the panel off.

3. Remove the seven

wing nuts and the

four outboard nuts

(two at each end).

4. Gently lower the liftgate.

5. Pull the lamp assembly directly rearward from

the vehicle.

402

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 527 528

Comments to this Manuals

No comments

Buick 2007 Rendezvous User Manual Page 402

Comments to this Manuals

Related products and manuals for Cars Buick 2007 Rendezvous