Buick 2011 Enclave User Manual download pdf (Page 171)

Black plate (45,1)

Buick Enclave Owner Manual - 2011

Instruments and Controls 5-45

Then press the customization button

to scroll through the following

settings:

OFF (default): Neither outside

mirror will be tilted down when the

vehicle is shifted into R (Reverse).

DRIVER MIRROR: The driver's

outside mirror will be tilted down

when the vehicle is shifted into

R (Reverse).

PASSENGER MIRROR: The

passenger's outside mirror will be

tilted down when the vehicle is

shifted into R (Reverse).

BOTH MIRRORS: The driver's and

passenger's outside mirrors will be

tilted down when the vehicle is

shifted into R (Reverse).

NO CHANGE: No change will be

made to this feature. The current

setting will remain.

To select a setting, press the

set/reset button while the desired

setting is displayed on the DIC.

EASY EXIT SEAT

If your vehicle has this feature, it

allows you to select your preference

for the automatic easy exit seat

feature. See Delayed Locking

on

page 2‑8

for more information.

Press the customization button until

EASY EXIT SEAT appears on the

DIC display. Press the set/reset

button once to access the settings

for this feature. Then press the

customization button to scroll

through the following settings:

OFF (default): No automatic seat

exit recall will occur.

ON: The driver's seat will move

back when the key is removed from

the ignition. The steering column

will also move up and forward on

vehicles with the power tilt and

telescopic steering feature. See

Steering Wheel Adjustment

on

page 5‑2

for more information.

The automatic easy exit seat

movement will only occur one time

after the key is removed from the

ignition. If the automatic movement

has already occurred, and you put

the key back in the ignition and

remove it again, the seat and

steering column will stay in the

original exit position, unless a

memory recall took place prior to

removing the key again.

NO CHANGE: No change will be

made to this feature. The current

setting will remain.

To select a setting, press the

set/reset button while the desired

setting is displayed on the DIC.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 457 458

Comments to this Manuals

No comments