Buick 2011 Enclave User Manual download pdf (Page 68)

Black plate (14,1)

Buick Enclave Owner Manual - 2011

3-14 Seats and Restraints

Removing the Third Row Seats

1. Remove the cargo management

system, if it is in the vehicle.

See Cargo Management System

on page 4‑3

.

2. Remove anything on or under

the seat.

Notice: Folding a rear seat with

the safety belts still fastened may

cause damage to the seat or the

safety belts. Always unbuckle the

safety belts and return them to

their normal stowed position

before folding a rear seat.

3. Fold the seatback down.

See “Folding the Seatback”

earlier in this section.

4. Remove the rear bolts located

on the floor on each side of

the seat.

5. Remove the seat by tilting it

slightly upward, and then pulling

it out of the rear of the vehicle in

one motion.

6. Replace the bolts in the floor

holes for storage.

Installing the Third Row Seats

1. Before installing the seat the

seatback must be folded

forward. See “Folding the

Seatback” earlier in this section.

The seats must be placed in the

proper locations to attach

correctly. The wider seat must

be installed on the driver side

and the narrower seat on the

passenger side. Remove the

bolts from the holes in the floor

before installing the seats.

2. Place the seat on the vehicle

floor so that the front seat hooks

are on the vehicle bars.

3. Reinstall the bolts, and torque to

55 Y (41 lb ft). Pull up on the

seat to make sure it is locked in

place.

4. Raise the seatback to its upright

position. Push and pull on the

seatback to make sure it is

locked into place.

5. Reconnect the center safety belt

mini-latch to the mini-buckle.

Do not let it twist.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 457 458

Comments to this Manuals

No comments