Buick 2011 Enclave User Manual Page 342

  • Download
  • Add to my manuals
  • Print
  • Page
    / 434
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 341
Black plate (50,1)
Buick Enclave Owner Manual - 2011
10-50 Vehicle Care
If the vehicle has a compact
spare tire, do not include it in
the tire rotation.
After the tires have been
rotated, adjust the front and rear
inflation pressures as shown on
the Tire and Loading Information
label. See Tire Pressure on
page 1043 and Vehicle Load
Limits on page 912.
Reset the Tire Pressure Monitor
System. See Tire Pressure
Monitor Operation on
page 1045.
Make certain that all wheel nuts
are properly tightened. See
Wheel Nut Torque under
Capacities and Specifications on
page 122.
{
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, use a cloth or a
paper towel to do this; but be sure
to use a scraper or wire brush
later, if needed, to get all the rust
or dirt off. See If a Tire Goes Flat
on page 1058.
Lightly coat the center of the
wheel hub with wheel bearing
grease after a wheel change or
tire rotation to prevent corrosion
or rust build-up. Do not get
grease on the flat wheel
mounting surface or on the
wheel nuts or bolts.
Make sure the spare tire, if the
vehicle has one, is stored
securely. Push, pull, and then try
to rotate or turn the tire. If it
moves, tighten the cable. See
Tire Changing on page 1068.
Page view 341
1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 433 434

Comments to this Manuals

No comments