Buick 2011 Enclave User Manual download pdf (Page 63)

Black plate (13,1)

Buick Enclave Owner Manual - 2011

Seats and Restraints 3-13

4. Remove the rear bolts on the

floor on each side of the seat.

5. Remove the seat by tilting it

slightly upward, and then pulling

it out of the rear of the vehicle in

one motion.

6. Replace the bolts in the floor

holes for storage.

Installing the Third Row Seats

To reinstall a third row seat:

1. Before installing the seat the

seatback must be folded

forward. See “Folding the

Seatback” earlier in this section.

The seats must be placed in the

proper locations to attach

correctly. The wider seat must

be installed on the driver side

and the narrower seat on the

passenger side. Remove the

bolts from the holes in the floor

before installing the seats.

2. Place the seat on the vehicle

floor so that the front seat hooks

are on the vehicle bars.

3. Reinstall the bolts, and torque to

55 Y (41 lb ft). Pull up on the

seat to make sure it is locked in

place.

4. Raise the seatback to the

upright position. Push and pull

on the seatback to make sure it

is locked into place.

5. Reconnect the center safety belt

mini-latch to the mini-buckle. Do

not let it twist.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 433 434

Comments to this Manuals

No comments