Buick 2003 Regal Specifications Page 127

  • Download
  • Add to my manuals
  • Print
  • Page
    / 346
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 126
Automatic Operation
AUTO
(Automatic):
Press the AUTO button for
automatic control of the inside temperature, the air
delivery mode and the fan speed. You may notice a
delay of two to three minutes before the fan comes on
when the automatic operation is used in cold weather.
For the automatic system to function, the temperature
must be set between
61
"F
(16°C) and
89°F
(31
"C).
1.
Adjust the temperature to a comfortable setting.
2. Press the AUTO button.
Choosing the coldest or warmest temperature
setting will not cause the system to heat or cool any
faster.
If you set the system at the warmest temperature
setting, 90°F (32"C), hot air will be directed to
the floor, the fan will increase to the highest speed,
and, the system will remain in manual mode at
that temperature. The system will not return
to automatic until the temperature setting is
lowered.
If you set the system at the coldest temperature
setting, 60°F (15"C), cold interior air will be
recirculated through the air panel outlets, and the
fan will increase to the highest speed. The
system will not return to automatic until the
temperature is raised.
In
cold weather, the system will start at reduced fan
speeds to avoid blowing cold air into your vehicle
until warmer air is available. The system will
start out blowing air at the floor but may change
modes automatically as the vehicle warms up
to maintain the chosen temperature setting. The
length
of
time needed for warm up will depend on
the outside temperature and the length of time
that has elapsed since your vehicle was last driven.
3.
Wait for the system to regulate. This may take from
10 to
30
minutes. Then, adjust the temperature,
if
necessary.
Do
not cover the solar sensor located in the center
of the instrument panel, near the windshield. For
more information on the solar sensor, see
"Solar Sensor" later in this section.
Manual Operation
During daylight hours, you may want to adjust the
instrument panel brightness control to the highest setting
in order to see the indicator lights that go on for the
various climate control settings.
OFF:
Pressing the
OFF
button cancels automatic
operation and places the system in manual mode. Press
the AUTO button to return to automatic operation.
3-22
Page view 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 345 346

Comments to this Manuals

No comments