Buick 2003 Regal Specifications download pdf (Page 228)

Checking the

Fluid

Level

Prepare your vehicle as follows:

Park your vehicle on a level place. Keep the engine

running.

With the parking brake applied, place the shift lever

in PARK

(P).

With your foot on the brake pedal, move the shift

lever through each gear range, pausing for about

three seconds in each range. Then, position the shift

lever in PARK (P).

Let the engine run at idle for three to five minutes.

Then, without shutting

off

the engine, follow these steps:

The automatic transaxle

fluid dipstick handle is the

black

loop

located

toward the rear

the

engine. See Engine

Compartment Overview

page

5-12

for more

information on location.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

Check both sides of the dipstick, and read the

lower level. The fluid level must be in the

cross-hatched area.

If the fluid level

in the acceptable range, push the

dipstick back in all the way.

How

Add

Fluid

Refer to the Maintenance Schedule to determine what

kind of transaxle fluid to use. See fat? D:

Recommended Fluids and Lubricants on page

6-15.

If the fluid level is low, add only enough of the proper

fluid to bring the level into the cross-hatched area on the

dipstick.

Pull out the dipstick and wipe it with a clean rag or

paper towel.

5-23

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 345 346

Comments to this Manuals

No comments

Buick 2003 Regal Specifications Page 228

Comments to this Manuals

Related products and manuals for Cars Buick 2003 Regal