Buick 2011 Enclave User Manual Page 271

  • Download
  • Add to my manuals
  • Print
  • Page
    / 434
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 270
Black plate (33,1)
Buick Enclave Owner Manual - 2011
Driving and Operating 9-33
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed is 40 km/h
(25 mph) or greater, press the +RES
button on the steering wheel. The
vehicle returns to the previously set
speed and stays there.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated,
.
Press and hold the +RES button
on the steering wheel until the
desired speed is reached, then
release it.
.
To increase vehicle speed in
small increments, press the
+RES button briefly. Each time
this is done, the vehicle goes
about 1.6 km/h (1 mph) faster.
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated,
.
Press and hold the SET button
on the steering wheel until the
lower speed desired is reached,
then release it.
.
To slow down in small amounts,
press the SET button briefly.
Each time this is done, the
vehicle goes about 1.6 km/h
(1 mph) slower.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase vehicle speed. When you
take your foot off the pedal, the
vehicle will slow down to the
previously set cruise speed.
Using Cruise Control on Hills
How well the cruise control will work
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal to maintain
the vehicle speed. When going
downhill, you might have to brake
or shift to a lower gear to keep the
vehicle speed down. When the
brakes are applied the cruise control
is disengaged.
Ending Cruise Control
There are three ways to end cruise
control:
.
Step lightly on the brake pedal.
.
Press the [ button.
.
To turn off the cruise control,
press
T on the steering wheel.
Erasing Speed Memory
The cruise control set speed is
erased from memory by pressing
the
T button or if the ignition is
turned off.
Page view 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 433 434

Comments to this Manuals

No comments