Buick 2010 Enclave User Manual download pdf (Page 110)

3-60 Seats and Restraints

Securing Child Restraints

(Rear Seat)

When securing a child restraint in

a rear seating position, study the

instructions that came with the

child restraint to make sure it is

compatible with this vehicle.

If the child restraint has the LATCH

system, see Lower Anchors and

Tethers for Children (LATCH

System)

on page 3‑53

for how and

where to install the child restraint

using LATCH. If a child restraint

is secured in the vehicle using a

safety belt and it uses a top tether,

see Lower Anchors and Tethers for

Children (LATCH System)

on

page 3‑53

for top tether anchor

locations.

Do not secure a child seat in a

position without a top tether anchor

if a national or local law requires

that the top tether be anchored, or if

the instructions that come with the

child restraint say that the top strap

must be anchored.

In Canada, the law requires that

forward-facing child restraints have

a top tether, and that the tether be

attached.

If the child restraint does not have

the LATCH system, you will be

using the safety belt to secure

the child restraint in this position.

Be sure to follow the instructions

that came with the child restraint.

Secure the child in the child restraint

when and as the instructions say.

If more than one child restraint

needs to be installed in the rear

seat, be sure to read Where to Put

the Restraint on page 3‑51.

1. Put the child restraint on

the seat.

2. Pick up the latch plate, and run

the lap and shoulder portions of

the vehicle's safety belt through

or around the restraint. The child

restraint instructions will show

you how.

3. Push the latch plate into the

buckle until it clicks.

Position the release button on

the buckle so that the safety belt

could be quickly unbuckled if

necessary.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 439 440

Comments to this Manuals

No comments